XL Rubber Floor Stripper

XL Rubber Floor Stripper is a Low Alkaline Stripper for use on Rubber, Linoleum and other pH Sensitive Floors. It easily cuts through multiple layers of existing floor finish. Low foaming and short dwell time make this product a must for all professional floor care systems.

WHERE TO USE

XL Matt Floor Finish offers a variety of surface applications including Vinyl, Linoleum and other Resilient Floors.

DIRECTIONS

XL Rubber Floor Stripper is formulated for the rapid removal of floor finish from Rubber, Linoleum and other Resilient Floors.

MIXING DIRECTIONS

Normal Stripping: Use 32 ounces per 1 gallon of cold water.

Heavy Stripping: Use 64 ounces per 1 gallon of cold water.

DIRECTIONS FOR USE

Sweep the floor first using a dust mop or hard surface vacuum. Mop properly diluted solution on floor, allow to dwell for 10 - 20 minutes (Do not allow mixed stripping solution to dry on floor). Scrub with rotary floor machine as needed to remove finish. Remove slurry with extraction machine or wet vacuum. Rinse floor thoroughly with fresh water. Allow floor surface to dry. Apply one of the XL Floor Finishes for desired look. Special Care: Check for color stability in floor before use. Floor dye migration may occur. Follow flooring manufactures recommendations on use of mechanical equipment, brushes and pads to be used on floor. On newly installed floors, follow manufactures recommendation on cure time prior to cleaning or applying floor finish.

Downloadable XL Rubber Floor Stripper documents
pdf MSDS
pdf Tech Data

888-530-2259 PO Box 2682 Fall River, MA 02722