No moisture, low moisture cleaning solutions

Commercial grade

Liquid Grab®

Low moisture carpet cleaner

Liquid Grab® is a unique low-moisture carpet extraction that dries into crystallized particles that encapsulate soil. After drying, the crystals are removed by dry vacuuming. The carpet is cleaned without over-wetting and surfactant build-up, helping to prevent re-soiling. Absolutely safe to use on nylon, wool, and stain resistant carpets.

Liquid Grab is good for general cleaning, low moisture for carpets. Counter rotating brush/vacuum

How to use

Before Use: Always test a hidden section of the carpet for color fastness. Vacuum area to be treated first to remove any loose soil.

For Spots and Stains on Carpets and Rugs:

  1. Mix 10 ounces of Liquid Grab® concentrate with 1 gallon of water in a clean, standard pump sprayer.
  2. Hold spray nozzle 10 to 18 inches from the carpet and apply Liquid Grab® to the entire area to be cleaned. Wet but do not saturate. One gallon of mixed formula covers approximately 915 square feet but varies according to pile thickness and degree of soiling.
  3. Work Liquid Grab® into the carpet or rug using a soft brush or a counter rotating brush machine and allow time for drying (30 minutes to 1 hour).
  4. Dry vacuum to remove crystals and encapsulated soil.
Enviro-Responsible Cleaning Solutions

Downloadable Liquid Grab® documents
pdf MSDS
pdf Sell Sheet


Liquid Grab comes in 4 gallon

Please send us an email or call us today—we look forward to helping you make your world cleaner and greener.
888-530-2259 PO Box 2682 Fall River, MA 02722