XL 4200 Cleaner

XL 4200 Cleaner is a non-alkaline, non-flammable clear liquid surfactant solution that will aid the lifting of latex, acrylic and pressure sensitive adhesives from flooring surfaces. It also aids in the removal of chewing gum. It works by penetrating and emulsifying the adhesive at the contact surface to loosen the bond. For best results, use at room temperature, carefully read and follow instructions for use. Always test a small area first before using.




For Use As A Spot Remover for Dry Adhesive or Chewing Gum on Carpet:

  • Step 1: Pick or peel away or otherwise remove as much of the dry adhesive or gum as possible. On carpet or upholstery, avoid grinding the gum or adhesive further into the fibers.
  • Step 2: Spray XL Cleaner 4200 directly onto the spot of adhesive or gum and wet thoroughly. Allow to soak for 5 minutes, then spray again.
  • Step 3: Test the spot with a plastic or wood scraper; again try to scrape the adhesive off the carpet without grinding it into the fibers. Chewing gum will “pill” or “ball up” due to the effect of XL Cleaner 4200. Sweep away these residues and continue finer cleaning with a cloth and/or soft brush. Avoid too much scraping or hard brushing as this will fray or damage the fibers.
  • Step 4: After the adhesive or gum is removed, rinse the spot with clean water, and blot dry with a clean towel.


There are no reviews yet.

Be the first to review “XL 4200 Cleaner”

Your email address will not be published. Required fields are marked *