Usage & Directions
Sweep the floor first using a dust mop or hard surface vacuum.
Prior to application, floor should be completely stripped of mold release or old finish and thoroughly rinsed or cleaned to an acceptable appearance.
The floor should be completely dry before applying the first coat and all subsequent coats.
Do not use an air mover or fan directly on the floor to dry finish, always use in an indirect manner.
- Using a microfiber pad or clean mop, apply 3–4 thin, even coats on unsealed floors. On cleaned or scrubbed floors, apply as needed.
XL Rubber Floor Finish is a buffable product however, follow flooring manufacturer’s recommendations regarding use of mechanical equipment on surfaces.
- Allow 24 hours for curing before any heavy furniture is put on the floor. Do not slide furniture on finished floor.
1st coat approx 2,000 sf. 2nd and above aprox 2,500 – 3,000 sf per application.