XL Rubber Floor Stripper

XL Rubber Floor Stripper is a pH sensitive stripper designed for use on rubber, linoleum and other resilient floors. It easily cuts through multiple layers of existing floor finish. Low foaming and short dwell time make this product a must for all professional floor care systems.

Find a DistributorBuy Online

1 Gallon Jug, Case of 4

$184.00

Usage & Directions

Directions

XL Rubber Floor Stripper is a concentrated formula.

Always sweep the floor first using a dust mop or hard surface vacuum.

  1. Mop properly diluted solution on floor.
  2. Allow to dwell for 10-20 minutes (do not allow mixed stripping solution to dry on floor).
  3. Scrub with rotary floor machine or counter rotating brush machine (use appropriate floor pads or brushes  per the flooring manufacturer’s recommendations as needed to remove finish.
  4. Remove slurry with extraction machine or wet vacuum.
  5. Rinse floor thoroughly with fresh water.
  6. Allow floor surface to dry prior to applying finishes or returning the space for use.

Note: Check for color stability in floor before use. Floor dye migration may occur.

Follow flooring manufacturer’s recommendations on use of mechanical equipment, brushes and pads to be used on floor.

On newly installed floors, follow manufactures recommendation on cure time prior to cleaning or applying floor finish.

Mixing Directions

Light Stripping/Deep Cleaning: 16 ounces per 1 gallon of cold water.

Normal Stripping: Use 32 ounces per 1 gallon of cold water.

Heavy Stripping: Use 64 ounces per 1 gallon of cold water.

Reviews

There are no reviews yet.

Be the first to review “XL Rubber Floor Stripper”

Your email address will not be published. Required fields are marked *